BullTron Inverter 2000W with Mains Priority Circuit and Remote Control

BullTron 2000W Inverter 12V/230V with Grid Priority Circuit

Optimal inverter with all convenient features
(grid priority circuit, 16A fuse, residual current device, On/OFF remote control)

BullTron inverters are designed and equipped to meet the requirements of specialized motorhome workshops.
They enable simple and time-saving installation without sacrificing convenience and safety.
All important functions and features are already integrated. This saves a lot of material and time during installation.
In addition, they significantly reduce space and weight, which is always a crucial factor in motorhomes.

With this inverter, you can charge e-bikes and laptops, use a travel hairdryer or kettle, etc., up to 2000W in your motorhome (whether powered by shore power or autonomously).


Easy Installation

• All you need to do is connect the battery to the inverter (don't forget a 200A fuse in the positive cable and use a sufficiently thick cable, min. 50mm²).
• Now all you need to do is plug the desired 230V device into the socket and turn on the inverter.
• The inverter can be switched ON/OFF directly on the inverter's display or using the separate remote ON/OFF switch.
• The integrated display also shows the voltage and power.

This significantly simplifies installation and saves a lot of space, time, and money. If necessary, the original 230V line can be restored without tools.
You can now use all sockets and connected 230V devices in your motorhome via shore power or the inverter/battery.
Devices that are not to be used via the inverter/battery, but only with shore power, are simply connected to the WAGO Winsta connector on the AC input.
Additional connection points are provided there.


Advantages of BullTron inverters

• Extremely small dimensions
• Very low weight
• Easy installation
• No additional material or labor required
• Illuminated remote ON/OFF switch, with 5m cable
• Uses high-quality and durable components
• Can be mounted under the seat together with the battery
• Integrated short-circuit protection

Technical Specifications

• Type: W2000-12-NVFILS
• Power (continuous/peak): 2000W / 4000W
• AC Voltage: 230V
• Frequency: 50Hz ± 0.5Hz
• DC Voltage: 12V DC
• Voltage Range: 10V – 15V
• Sine Wave: Pure Sine Wave
• AC Regulation: THD <3%
• Efficiency: 91%
• Protection Class: IP20
• Temperature Range: -30°C to +70°C
• Weight: 3.7 kg
• Dimensions (L x W x H) in mm: 320 x 197 x 82
• Installation Options: Vertical or Horizontal
• Certifications: CE, ECE R10, E-Mark

Additional Features

• Fuse: 16 A
• Residual current circuit breaker: 30 mA
• Monitoring: Illuminated ON/OFF switch, with 5m cable for connection to the inverter
• Fan Control: Temperature-controlled speed
• Inverter Start: Soft start
• Short Circuit Protection: Yes, with internal fuses
• AC Input Connection: Wago Winsta with strain relief incl.
• AC Output Connection: Wago Winsta with strain relief incl.
• DC Connection (Battery): M8 screw terminal
• Recommended DC cable fuse: 200A
• Recommended DC cable cross-section: min. 50mm² (depending on cable length)
• Warranty: 2-year manufacturer's warranty, 5-year optional, see button above

 
Optional Accessory: Function Remote Control / Display Power Settings, see button above


(Image similar, technical changes subject to change)
 

---

Special price is exempt from german VAT (0% VAT) for Photo Voltaic Installations in Germany.
Please note the following information on the legal german requirements for the 0% tax rate.

From January 1st, 2023 it is possible to buy private and non-profit PV systems with the zero percent tax rate in accordance with JStG 2022 § 12 Para. 3 UStG.
However, this zero percent tax rate is subject to certain conditions.
You must meet the following requirements for the zero percent tax rate:

• The installed PV system has a total output of no more than 30 kWp and is used privately or publicly, (within Germany only, according to the entry in the market master data register)
• No commercial resale.
• The purchase is made by and the delivery is made to the operator of the photovoltaic system.
• Ordered components are delivered on or near the (residential) building, a public building or a "building serving the common good" in Germany.
• You acquire the components for a new system or to expand an existing private or public PV system.
• If the legislator requires further documents or papers, we reserve the right to request them.

You confirm that if you reject the zero percent tax rate or provide false information, you are liable and pay the VAT back to us.
Please note that there may still be changes or adjustments to the procedure due to further instructions from authorities and the legislature.
We reserve the right to demand VAT that is due. Link to application form here

---

• Domestic deliveries only
• Net conditions apply according to german law to customers located in Germany only !